Understanding Your Results
Food remaining is grams actually available, not the original bag size. Daily use is per pet and is multiplied by the pet count; unequal portions need separately allocated stock.
The quantity beside the item name is the stock value used for LOW STOCK: quantity at or below your minimum triggers that status. Additional days, cycles, sets or dates describe the entered assumptions; they are not a live measurement. Recount after use, receipt or relocation. A different device reads the printed snapshot and does not automatically receive later inventory changes.
One hundred grams is an example input, not feeding advice.
Practical Examples
These are illustrative household inputs, not product specifications or recommended use rates. Enter each record below, select Calculate & Save, and compare the displayed calculation.
Estimate one pet’s remaining food duration
A measured bag remainder is used at an entered daily amount.
Weigh the remaining food and enter the daily amount per pet.
Inputs: Food remaining (g): 3000; Grams per pet per day: 100; Number of pets: 1.
Result: 3,000 ÷ 100 = 30 days; use your measured consumption, not a feeding recommendation. Saved quantity: 3000 g.
The arithmetic estimate is thirty days.
One hundred grams is an example input, not feeding advice.
Read the full worked exampleAccount for two pets sharing the same daily amount
Both pets receive the same entered amount from this stock.
Use the per-pet amount and set the pet count to two.
Inputs: Food remaining (g): 3000; Grams per pet per day: 100; Number of pets: 2.
Result: 3,000 ÷ 200 = 15 days; use your measured consumption, not a feeding recommendation. Saved quantity: 3000 g.
The shared stock lasts fifteen estimated days.
Use separate records when individual diets or portions differ.
Read the full worked exampleHandle unequal portions without pretending pets eat equally
Two separately allocated food amounts support different entered portions.
Allocate the physical stock and calculate each portion profile separately.
Inputs — record 1: Food remaining (g): 1000; Grams per pet per day: 100; Number of pets: 1.
Result: 1,000 ÷ 100 = 10 days; use your measured consumption, not a feeding recommendation. Saved quantity: 1000 g.
Inputs — record 2: Food remaining (g): 1000; Grams per pet per day: 50; Number of pets: 1.
Result: 1,000 ÷ 50 = 20 days; use your measured consumption, not a feeding recommendation. Saved quantity: 1000 g.
The allocations last ten and twenty days respectively.
The allocation example does not determine appropriate nutrition.
Read the full worked exampleCommon Mistakes to Avoid
A fractional day is not rounded upward to a guaranteed eighth day. Seven and a half estimated days remain. Consumption and weighing uncertainty can change the estimate.
Typing 1.5 would mean one and a half grams. The allocation supports twenty days at the entered rate. Only mass units are converted; feeding requirements are not inferred.
A zero rate would mean the duration calculation is undefined. The estimate is zero days and stock is below minimum. A stock estimate is not a substitute for care planning.
How do I record an empty bag without using a zero feeding rate?
Keep a positive entered rate and record zero remaining mass. The estimate is zero days and stock is below minimum.
A stock estimate is not a substitute for care planning.
How do I reserve food for a short trip?
Remove the allocation from the home record before saving this entry. The kit covers six estimated days at the stated amount.
Suitability and feeding directions must be checked separately.
How do I add a received bag without discarding the open remainder?
Enter the combined measured available mass after receipt. The estimate rises from five to thirty-five days.
Combine only stock intentionally covered by the same consumption assumption.
How do I reassess duration after a changed recorded daily amount?
Change the entered rate only when justified by the actual feeding plan. The estimate changes from twenty-four to twenty days.
The calculator must not be used to choose the feeding plan.
How do I rebuild the label after measuring a lower food remainder?
Save the new mass and rebuild the snapshot. The new label describes sixteen rather than twenty estimated days.
The label has no sensor or automatic feeding log.